Vraag VRIJBLIJVEND een offerte aan
Do you have a question? Call us: +31(0)180465387
Accessories for your thermoboxes
A handy lid with an 1/1 EN Cooling Element inside a special recess underneath. This way you can give e.g. your meat a cool impulse without putting a seperate cooling top on the box!
Metalen tussenstuk voor GN 1/6. Deze steg kan worden gebruikt om ook 1/6 GN bakken in de thermoboxen te plaatsen.
Click-to-connect system expandable from 3 to 12 cupholders. Outer dimensions: 335x117x135 mm. Inner dimensions: 3x ø 69-88 mm
Stainless steel Adaptor bar 32,5 cm for GN 1/6. This bar can be used to place 1/6 GN containers in the thermo boxes.
This GoBox Railboard is a board with rails, which you place inside the GoBox on the long sides. This way you can easily transport plates within the box. With an addtional divider, you can make separate compartments using the railboards in the GoBox, so you can transport different sized plates in the same box. Suitable for the EPP180, EPP180LH.
A divider which can be used in conjunction with the Railboards to divide the GoBox into two compartments. This way you can carry multiple plates and dishes simultaneously within the box. Suitable for the EPP180, EPP180LH.
A lid with a hinge over its center, so you can open one side of the box while the other side remains sealed. This way you won't have to remove the lid completely in order to load/unload the box. Suitable for the EPP180, EPP180LH, EPP160.
Also check our socials >